5.5kw 8 Ploe Y2 Motor Electric Motor AC Motor

ac motor

INQUIRY PRECISE INQUIRY

Description

Basic Info

Model NO.: Y2-160M2-8
Speed: Low Speed
Function: Driving
Number of Poles: 8
Certification: ISO9001, CCC, Ce
Voltage: 380V
Power: 5.5kw
Protection: IP54
Working System: S1
Transport Package: Export Package
HS Code: 8501200000

Application: Industrial
Number of Stator: Three-Phase
Casing Protection: Closed Type
Starting Mode: Direct on-line Starting
Brand: Dsx
Frequency: 50Hz
Base No: Y2-160m2-8
Insulation Grade: F
Trademark: DSX
Origin: Zhengzhou. China

Product Description

Product introduction
Y2 series three-phase asynchronous motor conforms to the GB 18613-2012 "small and medium-sized two-phase (three-phase) asynchronous motor energy efficiency limits and energy efficiency rating" in the provisions of the 2 grade efficiency standards. At the same time, it also conforms to the IEC60034-2008-30 standard IE3 energy efficiency rate.
Its design of improving the efficiency is in line with the requirements of energy saving put forward by the state for the industry of production and manufacturing.
Y2 series motor mounting dimensions conform to IEC60034 standard, with the advantages of reasonable structure, beautiful appearance, high efficiency, low noise, high protection grade and insulation grade ,etc. It is widely used in fans, pumps, machine tools, compressors and transport machinery, driving general-purpose machinery and equipment. It also can be used in these conditions, such as petroleum, chemical industry, iron and steel, mining and in other relatively poor environment.
Site conditions
Y2 series motors can be used in most occasions and environments. The motor's standard operating
condition is -20 degrees C to +40 degrees C, 1000 meters above sea level.
Temperature rise and insulation
The insulation design of the motor is according to F grade(155 degrees C), and the insulation assessment
is according to B grade (80K). The motor's useful life and reliability are guaranteed.
Cooling and ventilation
The standard cooling method is fully closed self fan cooling (TEFC). The standard motor conforms to the
provisions of 60034-6 IC411 in IEC with auxiliary flow plastic fan.
Level of protection
The protection level of the motor is IP54. The motor can be used in the dust or wet environment. We can also provide a higher level of protection of the motor basing on customer's requirements.
Motor protection
According to the requirements of the customers, PT100, PTC winding, bearing temperature measurement
and other protection device can be installed.
Voltage and frequency
The standard motor is 380V/50HZ. 50Hz motor can be designed in the range of 200~660V arbitrary
voltage. In the case of power supply voltage deviation from the rated voltage of + 5%, it can still be in good operation.
Vibration
Y2 series motor at no load vibration speed level is in line with the class A. We can provide the motor of
class B, if any special requirement.
Quality assurance
We strictly comply with the quality procedures from designing the product to finishing the product according
to the IS09001 quality certification system.

Motor's model type is made up by code and specifications of the products of two partially lined,according to GB/T 4831 mode

Y2 - 90S - 4
A B
A: The second modification design of asynchronous motor
: B: Specifications code, represent shaft height 90mm, short frame :,4 poles;

The normal work of the motor basic conditions:
(1) the altitude does not exceed l000m;
(2) the highest air temperature does not exceed 40 ºC; Minimum ambient air temperature was minus 15 ºC;
(3) the wet month average high relative humidity is 90% and the month average minimum temperature is not higher than 25 ºC;
(4) power frequency 50 Hz + l %;
(5) Rated Voltage: 380V .
working voltage range is not greater than the rated voltage + / - 5%;
(6) motor quota of continuously S1.
(7)Cooling Method: IC411.
(8)Protection Class: IP54.
(9)Insulation Class: F
(10)Connection: Star-connection for up to 3kW; Delta-connection for 4kW and above
Degrees of protection

Designation	First numeral	Second numeral
IP55	Dust protected	Jetting water
IP56	Dust protected	Powerful Jetting
IP65	Dust tight	Jetting water
IP66	Dust tight	Powerful Jetting

Mounting arrangements
5.5kw 8 Ploe Y2 Motor Electric Motor AC Motor

The corresponding table about the frame no., rotate speed and power of the motor

Frame	Synchronous speed (r/min)
	3000	1500	1000	750	600
	Power (kW)
63M1	0.18	0.12
63M2	0.25	0.18
71M1	0.37	0.25	0.18
71M2	0.55	0.37	0.25
80M1	0.75	0.55	0.37	0.18
80M2	1.1	0.75	0.55	0.25
90S	1.5	1.1	0.75	0.37
90L	2.2	1.5	1.1	0.55
100L1	3	2.2	1.5	0.75
100L2	3	3	1.5	1.1
112M	4	4	2.2	1.5
132S1	5.5	5.5	3	2.2
132S2	7.5	5.5	3	2.2
132M1		7.5	4	3
132M2		7.5	5.5	3
160M1	11	11	7.5	4
160M2	15	11	7.5	5.5
160L	18.5	15	11	7.5
180M	22	18.5
180L		22	15	11
200L1	30	.30	18.5	15
200L2	37	.30	22	15
225S		.37		18.5
225M	45	45	30	22
250M	55	55	37	30
280S	75	75	45	37
280M	90	90	55	45
315S	110	110	75	55	45
315M	132	132	90	75	55
315L1	160	160	110	90	75
315L2	200	200	132	110	90
355M1	250	250	160	132	110
355M2	250	250	200	160	132
355L	315	315	250	200	160

The corresponding table about power, efficiency value and power factor of the motor
Arrangement and parts list

Power kW	Synchronous speed (r/min)
	3000	1500	1000	750	600	3000	1500	1000	750	600
	Efficiency η %					Power factor cosφ
0.12		57					0.72
0.18	65	60	56	51		0.8	0.73	0.66	0.61
0.25	68	65	59	54		0.81	0.74	0.68	0.61
0.37	70	67	62	62		0.81	0.75	0.7	0.61
0.55	73	71	65	63		0.82	0.75	0.72	0.61
0.75	75	73	69	71		0.83	0.76	0.72	0.67
1.1	76.2	76.2	72	73		0.84	0.77	0.73	0.69
1.5	78.5	78.5	76	75		0.84	0.79	0.75	0.69
2.2	81	81	79	78		0.85	0.81	0.76	0.71
3	82.6	82.6	81	79		0.87	0.82	0.76	0.73
4	84.2	84.2	82	81		0.88	0.82	0.76	0.73
5.5	85.7	85.7	84	83		0.88	0.83	0.77	0.74
7.5	87	87	86	85.5		0.88	0.84	0.77	0.75
11	88.4	88.4	87.5	87.5		0.89	0.84	0.78	0.76
15	89.4	89.4	89	.88		0.89	0.85	0.81	0.76
18.5	90	90	90	90		0.9	0.86	0.81	0.76
22	90.5	90.5	90	90.5		0.9	0.86	0.84	0.78
30	91.4	91.4	91.5	91		0.9	0.86.	0.84	0.79
37	92	92	92	91.5		0.9	0.87	0.86	0.79
45	92.5	92.5	92.5	92.	91.5	0.9	0.87	0.86	.79	0.75
55	93	93	92.8	92.8	92	0.9	0.87	0.86	0.81	0.75
75	93.6	93.6	93.5	93	92.5	0.9	0.87	0.86	0.81	0.76
90	93.9	93.9	93.8	93.8	93	0.91	0.87	0.86	0.82	0.77
110	94	94.5	94	94	93.2	0.91	0.88	0.86	0.82	0.78
132	94.5	94.8	94.2	93.7	93.5	0.91	0.88	0.87	0.82	0.78
160	94.6	94.9	94.5	94.2	93.5	0.92	0.89	0.88	0.82	0.78
200	94.8	94.9	94.5	94.5		0.92	0.89	0.88	0.83
250	95.2	95.2	94.5			0.92	0.9	0.88
315	95.4	95.2				0.92	0.9

Motor Installation size

Dimensions foot mount B3

Frame	Pole	Installation dimensions mm										Overall dimensions mm
		A	A/2	B	C	D	E	F	G^a	H	K^b	AB	AC	AD	HD	L
80M	2,4,6	125	62.5	100	50	19	40	6	15.5	80	10	165	175	145	220	305
90S		140	70		56	24	50	8	20	90		180	195	165	260	360
90L				125												390
100L		160	80	140	63	28	60		24	100	12	205	215	180	275	435
112M		190	95		70					112		230	240	190	300	470
132S		216	108		89	38	80	10	33	132		270	275	210	345	510
132M				178												560
160M		254	127	210	108	42	110	12	37	160	14.5	320	330	255	420	700
160L				254												740
180M		279	139.5	241	121	48		14	42.5	180		355	380	280	455	790
180L				279												790
200L		318	159	305	133	55		16	49	200	18.5	395	420	305	505	830
225S	4	356	178	286	149	60	140	18	53	225		435	470	335	560	830
225M	2			311		55		16	49							825
	4,6					60		18	53							855
250M	2	406	203	349	168					250	24	490	510	370	615	915
	4,6					65			58
280S	2	457	228.5	368	190					280		550	580	410	680	985
	4,6					75		20	67.5
280M	2			419		65		18	58							1035
	4,6					75		20	67.5
315S	2	508	254	406	216	65		18	58	315	28	635	645	530	845	1180
	4,6					80	170	22	71							1290
315M	2			457		65	140	18	58							1210
	4,6					80	170	22	71							1320
315L	2			508		65	140	18	58							1210
	4,6					80	170	22	71							1320
355M	2	610	305	560	254	75	140	20	67.5	355		730	710	655	1010	1500
	4,6					95	170	25	86							1530
355L	2			630		75	140	20	67.5							1500
	4,6					95	170	25	86							1530
3551	2	630	315	800	224	80	170	22	71		35	760	770	760	1130	1870
3552	4,6					110	210	28	100							1920

Dimensions foot mount B35 OR B5

Frame	Flange	Pole	Installation dimensions mm																	Overall dimensions mm
			A	A/2	B	C	D	E	F	G^a	H	K^b	M	N	P^c	R^d	S^b	T	Flange hole number	AB	AC	AD	HD	L
80M	FF165	2,4,6	125	62.5	100	50	19	40	6	15.5	80	10	165	130	200	0	12	3.5	4	165	175	145	220	305
90S			140	70		56	24	50	8	20	90									180	195	165	260	360
90L					125																			390
100L	FF215		160	80	140	63	28	60		24	100	12	215	180	250		14.5	4		205	215	180	275	435
112M			190	95		70					112									230	240	190	300	470
132S	FF265		216	108		89	38	80	10	33	132		265	230	300					270	275	210	345	510
132M					178																			560
160M	FF300		254	127	210	108	42	110	12	37	160	14.5	300	250	350		18.5	5		320	330	255	420	670
160L					254																			700
180M			279	139.5	241	121	48		14	42.5	180									355	380	280	455	740
180L					279																			790
200L	FF350		318	159	305	133	55		16	49	200	18.5	350	300	400				8	395	420	305	505	790
225S	FF400	4	356	178	286	149	60	140	18	53	225		400	350	450					435	470	335	560	830
225M		2			311		55		16	49														825
		4,6					60		18	53														855
250M	FF500	2	406	203	349	168					250	24	500	450	550					490	510	370	615	915
		4,6					65			58
280S		2	457	228.5	368	190					280									550	580	410	680	985
		4,6					75		20	67.5
280M		2			419		65		18	58														1035
		4,6					75		20	67.5
315S	FF600	2	508	254	406	216	65		18	58	315	28	600	550	660		24	6		635	645	530	845	1180
		4,6					80	170	22	71														1290
315M		2			457		65	140	18	58														1210
		4,6					80	170	22	71														1320
315L		2			508		65	140	18	58														1210
		4,6					80	170	22	71														1320
355M	FF740	2	610	305	560	254	75	140	20	67.5	355		740	680	800					730	710	655	1010	1500
		4,6					95	170	25	86														1530
355L		2			630		75	140	20	67.5														1500
		4,6					95	170	25	86														1530
3551	FF840	2	630	315	800	224	80	170	22	71		35	840	780	900					760	900	760	1130	1870
3552		4,6					110	210	28	100														192

Related Sell

Phone

Address

E-mail

5.5kw 8 Ploe Y2 Motor Electric Motor AC Motor